- Welcome to Open Lunchbox Forums.
Recent posts
#1
SLS - Selective Laser Sintering / Discord Invite
Last post by Mine - July 12, 2024, 05:22:58 PM #2
SLS - Selective Laser Sintering / Electronic Design Files
Last post by Mine - July 12, 2024, 05:10:33 PMElectronic Design Files
#3
SLS - Selective Laser Sintering / Software
Last post by Mine - July 12, 2024, 05:09:57 PMSoftware
Initial design will use LinuxCNC using PC's, Rpi's, Opi's, Bpi's or other suitable low cost controllers.
Initial design will use LinuxCNC using PC's, Rpi's, Opi's, Bpi's or other suitable low cost controllers.
#4
SLS - Selective Laser Sintering / Mechanical Design Files
Last post by Mine - July 12, 2024, 05:09:19 PMMechanical Design Files
#5
Schematics and PCB Files / PCB Files
Last post by Mine - May 27, 2015, 09:27:07 PMPDF of PCB Files
#6
Schematics and PCB Files / Schematics
Last post by Mine - May 27, 2015, 09:24:58 PMPDF of Schematics
#7
Overall Design / Possible ARM SOC's for ARM Ver...
Last post by Mine - May 02, 2015, 02:14:44 PM #8
Electron Beam / Electron Beam Induced Depositi...
Last post by Mine - April 18, 2015, 07:36:49 PMElectron Beam Induced Deposition (EBID)
http://www.jcnabity.com/gisdots1.htm
http://www.jcnabity.com/gisdots1.htm
#9
Electron Microscopes / DIY STM
Last post by Mine - April 18, 2015, 07:28:47 PMHome-Built STM
http://dberard.com/home-built-stm/
Scanning-Tunneling-Microscope Kit
http://sxm4.uni-muenster.de/stm-en/
http://dberard.com/home-built-stm/
Scanning-Tunneling-Microscope Kit
http://sxm4.uni-muenster.de/stm-en/
#10