Open Lunchbox Forums

Open ECU's (Engine Control Units) => Hardware => Topic started by: Mine on April 18, 2015, 10:37:45 AM

Title: ECU Block Diagrams
Post by: Mine on April 18, 2015, 10:37:45 AM
ECU Block Diagrams

The microcontrollers are on a small module that plugs into a socket on the IO boards.

The first microcontroller module will be a stm32f4 and most likely followed by a MC9S12XDP512.

STM32F429NI  http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1577/LN1806/PF255172#

Same pinout as the soon to be released STM32F756NG  http://www.st.com/web/catalog/mmc/FM141/SC1169/SS1858/LN1902/PF260794#

There are three IO board versions. 1-2Cyl, 1-6cyl and 1-16 cyl.

This way the same IO boards are used with any microcontroller and software project.